Industrial Pull-out Shelving solution for Injection Mold Storage
Unisource Pull-out Shelving is mainly used for storage of all kinds of mold, Dies, Toolings
and any tpe of Parts. They could be assembled with manual movable
carriage on the top so as to easily take and retrieve the goods.
The side rack was equipped with idler wheel rail on the bottom and
the sliding shelf panel could be freely pulled out when loading.
The middle type slide rack could carry less than 800KG/Layer. The
entire drawer type mold storage rack is section combination structure, which is convenient for
transport, and the assembly is simple and fast and this rack
possesses better safety protection device. Special drawer type mold
rack can be ordered. Get a quote today.
1. Add additional fixing equipment, can be used safely;
2. Easy operation: with bearing assembly, sliding easy and can work
with crane devices;
3. Save space and cover less area, 3*4 standards shelf can be
deposited with dozens dies;
4. Simple structure: composed by a variety of components, easy for
transport and assembly;
Quick Specification of Mold Storage Racks:
|Item number||Drawer Mold Rack, Sliding Rack, Tooling Rack|
|Material||High Grade Hot Rolled Q235B or Q345|
|shelf||Draw-able, can be half open or widely open|
|Standard size||L3000*W625*H2000mm,L1385xW800xH2000 can customized any size|
|Level & Loading Capacity||4 The top level is fixed and its loading capacity is equal to or
bigger than 1000kg. The lower three levels can be drawn out 500mm
and can load as much as 1000kg.|
|Drawer mold rack using||Storage mold / Die / Heavy Duty Accessories / Parts|
|Surface treatment||Powder coated|
|color||Green or as customized|
|upright post||100*50MM square tube, #10 channel steel|
|upright post spacer||2.0MM cold roll steel|
|Drawer material||2.0MM cold roll steel|
|Accessories||overhead traveling crane and chain block|
Note:The lower three levels can only be drawn out one by one.(when first
level is drawn out. The second and third level can not be drawn
out. This is because of the self-locked system. We design this
system to protect the whole rack in stable situation and safe.
Unisource Mold Storage Racks Components:
1. Travelling Crane Arm
2. Front Crane Rail
3. Rear Crane Rail
4. Rear Bracing
5. Fixed Frame
7. Safety Screw
8. Sliding Plate
9. Stud bolt
Mould rack is composed of upright frame, steel decking, support
structure, self locking devices etc,
The support structure is the secondary design, the loading capacity
of the single drawer is generally within 1000KG.
The drawer decking can be designed to the semi-open.It is suitable
for storing molds etc, the crane, forklift, self-made trolley can
be used for picking up goods.The particular slide-way design makes
the small using resistance, and the self-locking device can be
reliable, and safe.,Each drawer can be drawn out 60% of its depth.
Our own factory plant was built in 2005, located in No. 21, Buyue
rd, Pukou Economic Development Zone, Nanjing City, Jiangsu
Province, China. Mainly focus on developing and manufacturing : storage racking system and material handling equipment.
We have 30,000 square meters of construction area, 6 nos. of
upright, beam and bracing roll-forming lines, 2 nos of fully
robotic beam welding machines, 1 no. of steel shelf roll forming
production line, 1 no. of steel pallet production line, 40 nos. of
carbon dioxide welding machines, complete set of surface
pre-treatment and automatic electrostatic powder coating line.
Yearly production capacity up to 18,000 tons at present.
Service Offered by Unisource:
Pre-sales service offered:
Inquiry and consulting support;
Products design and projects layout support;
Factory on-site auditing support;
After-sales service offered:
Installation manual and drawing offered;
Installation guidance overseas;
Production process on-site and package checking service;
Damage replacement or compensation;
Within 15-20 days for ordinary order quantity.
Big production capacity allow us in a position to make quick
Shipment & Price term:
FOB, CFR, CIF, EXW. We also can help to arrange the shipment if
TT, L/C, West Union.
3~10 years warranty in case that
A) Proper handling during operation, correctly forklift handling
B) Overloading is prohibited
C) Environment request –indoor, dry and not humid circumstance, do
not contact with any corrosive chemical material (for zinc plated
and powder coated products, no limitation for hot dip galvanized)
D) We will take full responsibility for any manufacturing defect is
identified after arrival, would either refund or reship good
products to you.
Our Promise as below: ( ^_^ )
1. Material is steel Q235 /345, high-quality steel from famous
Steel Corporation , the top 5 steel manufacturer in China;
2. Samples could be supplied for you in 7 days;
3. Products could be customized as your request;
4. Matters not mentioned herein could be discussed!
Get a quote today:
1) your warehouse drawing (if available)
2) warehouse door site
3) length, width, clear height of the warehouse
4) the size and weight of the pallet (after loading)
5) it's better know the pallet forklift access size
Tel: (+86) 25 68665250
Fax:(+86) 25 58187813
Our company is flexible and we can adapt to your design.
Please feel free to contact me for storage equipment any time.
We can quote you upon request, and will reply you within 24 hrs.